| 桑木层孔菌固体培养条件的研究 |
| Solid culture conditions of Phellinus mori |
| |
| 中文关键词:桑木层孔菌，碳源，氮源，酸碱度，温度 |
| 英文关键词:Phellinus mori, carbonic source, nitrogen source, pH, temperature |
| 基金项目:中央高校基本科研业务费专项资金（No. BLYX200912）；国家自然科学基金（No. 30870013） |
|
| 摘要点击次数: 1652 |
| 全文下载次数: 1089 |
| 中文摘要: |
| 为了研究不同碳源、氮源、初始pH及培养温度对桑木层孔菌菌丝生长的影响，采用固体平板培养法研究了桑木层孔菌的培养条件，结果表明，该菌在淀粉为碳源时生长速度最快但长势较弱，在以葡萄糖和麦芽糖为碳源时生长速度比淀粉为碳源时稍慢，但长势最好；最适氮源为酵母浸粉；初始pH在5.5－8.0范围内变化时菌丝生长差异不大；培养温度在28－33℃范围内对菌丝生长有明显的促进作用。 |
| 英文摘要: |
| Phellinus mori was a recently described species of Phellinus. In order to investigate the influence of different carbon sources, nitrogen sources, initial pH and temperature on mycelial growth of P. mori, its solid culture conditions were studied. The results showed that starch gave the maximum growth rate with less biomass, and glucose and maltose did the opposite. Yeast extract powder was the optimum nitrogen source. The variation of pH value between 5.5－8.0 did not affect the mycelial growth significantly, and the optimum temperature for mycelial growth was from 28℃ to 33℃. |
| 曹春蕾,崔宝凯,包海鹰. 桑木层孔菌固体培养条件的研究[J]. 菌物学报, 2011, 30(3): 486-490 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
|